
Add to Cart
Heat disinfection device and circulation device of Purified water system for Pharmaceutical
Purified water for pharmaceutical
purified water system protected while no power, poor power, larger electrical current, leakage, short circuit.
RO water for pharmaceutical plant with PLC and touch screen control and remote login .(Siemens PLC and Touch screen or Mitsubish PLC and tourch) This parts is optional
purified water system produce as per ISO and SGS standard and main parts accessories with CE certification.
More than 10 years production experience.
Purified water system for pharmaceutical info:
Project information: | Heat disinfection device and circulation device |
Treated water quality: | Used for below treated water disinfection Produced water is used as pharmaceutical water, according to USP standards: TOC (total organic carbon) <500ppb, conductivity <1.3us/cm, aerobic bacteria <100cfu/ml |
Disinfection capacity: | 250L/hr,<1.0µS/cm |
Power supply: | 3PH x 415V, 50Hz,4KW |
Installation size: | L1.5×W1×H2.45(m), Packing size 8m³,include the sterilizer tank. |
Production time: | 6 weeks |
Contact date | Feb 7th,2022 |
Process flow chart | Purified water—booster pump—heat disinfection heat exchanger—water point—purified water tank |
Mark: | Full set of pipe fittings SS316 |
Purified water system for pharmaceutical details:
Installation size: L3.5×W0.8×H1.2(m), after packing about 4CBM | ||||
No. |
Item |
Specification |
Unit |
Qty |
1 |
Source water |
3000L product water tank with liquid level sensor |
set |
1 |
2 |
Booster pump (Sanitary, hot water pump) | Model: CHL2-20 Material: SUS316L Voltage: 3PH 415V/50Hz Power: 0.37KW Brand: CNP/CN |
set |
1 |
Accessories |
Base,regulating valve, check valve, etc. |
lot |
1 | |
3 |
Heat exchanger | Model: HY-HT2T3
Material: SUS316L Method: Steam |
set |
1 |
Accessories |
Thermostat/switch valve/regulating valve |
lot |
1 | |
Frame |
Material: SUS304 |
set |
1 | |
Accessories |
Pressure gauge, pipe, etc. |
lot |
1 | |
4 |
Steam generator |
Model: LDZ0.138-0.7-D Material: SUS304 housing Voltage: 3PH 415V/50Hz Power: 100KW Evaporation capacity: 138kg/h Rated steam pressure: 0.7Mpa Steam temperature: 170℃ |
set |
1 |
5 |
Electrical controller system |
Electrical components, circuit breaker, contactor, thermal relay, etc. |
set |
1 |
6 |
Pipes |
Material: SUS316L | lot |
1 |
Client requirement:
The system must comply with GMP pharmaceutical use for medicine manufacturing. All pipes should be SS316. The system must be a double pass RO system with EDI.
Process: Double RO+system+EDI, all material SS316
1) For system:
1. The system should seamlessly fit into user current distribution loop which is 126m in total length with a diameter of 1 inch and 8 sampling points.
2. The system must be compatible with user existing 3000L storage water tank.
Can I know will the product water pipe connect to storage water tank or loop, and connection size there?
The product water pipe will connect to our storage tank
3. The piping of the system must be SS316L and its interior surface finish requirement of <0.8micrometer Ra
As DB and MB require chemicals for resin regeneration, even SS316L corrosion resistance not good as UPVC, we can revise if required.
This is for connection from TOC resolver to product water tank connection
4. The requirement of the purified water distribution and generation loop to conduct sanitization is required.
This could be heat sanatization using hot water at 85 C
With regards to the ss316 piping for the system;
Based on the definition of purified water, it will be required to have
SS316L right after the 1st RO stage and onwards. I.e., in the generation
system itself, it will be made of SS316L. Only at pretreatment stage
until the RO membrane to made from PVC pipes.
More tap purified water system for pharmaceutical pls contact us:
Email: sales@seawaterroplants.com
www.seawaterroplants.com
Mobile/Whatsapp/Wechat +86 135-4477-4483
1- We will offer 3Q(IQ, OQ, PQ) once finished the production, to fill info in.
The system is designed as whole integrated type, before delivery we will commission to ensure it can operate properly, and send you video of that.
Engineer Certification
Patents and ISO
Warmly remind:
Dear client, please tell us the following information for choosing the righ solution for you.
If you don’t have water analysis report. Please tell us the water situation. For example the color, odor, turbidity. Underground or river water or other feed water?
What’s the brand of the main accessories?
Warranty and service
Shipping Delivery Time, Payment Terms , MOQ , Warranty